Design & Procurement (preparing technical specifications, resolving pre-bid queries,

vendor drawing review, etc.) Experience Min: 10+ Years in Airport, Metro, Hospital,

Factories & Building, Ports, High Rise Bldg, etc in a Contracting / consultancy firm.

 Minimum Qualification: B.E. / B.Tech Electrical Engineering

 Aptitude towards adaption of new technologies to improve productivity and quality

 Must be pro-active and well communicative in approach.

 Experience in designing & procurement of AIS / GIS / Hybrid type 66KV /33KV/11KV

Substations, Compact Substations (CSS), switch yard hardware’s e.g., Clamps,

Connectors, insulator strings shall be an added advantage

 Must have completed Minimum 02 Projects from Design to Hand over stage

independently.

 Experience in project planning, scheduling, monitoring &; work delegation to designers

 Well versed with Codal Requirement in Substation & electrical Design

 Hands on experience of relevant IS / BS / IEC / NEC / NFPA / NBC/ Green building/

GRIHA standards/ requirements during design

 Experience in designing and selection of HT switch gears (Circuit Breakers, Isolators,

Load Break Switch, Surge Arrestor, Earth Switches, etc)

 Experience in designing, procurement & selection of LT distribution system &

switchgear/ panels, Bus Ducts/ Bus riser/ Trunking systems

 Experience in designing, sizing, procurement & selection of Power & distribution

Transformers / DG sets/ UPS systems

 Experience in selection of HT & LT Cables base on short circuit, voltage drop calculation

 Experience in design calculations viz. fault level calculation, earthing, lightning

protection, lighting, relay co-ordination, etc.

 Experience in Peer Review of design, drawings, documents.

 Experience in analysing RFP/ Tender Documents, Drgs, etc, raising of Pre-bid queries

 Leading Technical discussions with client, consultant, PMC, vendors and other stake

holders (interaction with government/ public sector officials shall be added advantage)

 Hands on experience in preparation of Concept Design Documents & Drgs, estimating

BoQs at RFP stage & preparation of detailed BoQ during design.

 Hands on experience in preparation of Design Basis Report (DBR) & layouts (power,

cable tray, lighting, lightning protection, substation, etc.)

 Familiarization with AUTOCAD, BIM operation

 Hand on experience on review of MEP coordinated drawing

 Experience in factory witness test of transformers, DG testing, HT & LT panels, UPS